How to Apply J-B KWIK

Instructions:

MIXING: J-B KWIK consists of two parts. Squeeze equal parts from each tube onto any clean disposable surface. Mix together thoroughly. A wooden dowel or paddle is a good mixing tool.

PREPARING SURFACE: Surface for application must be clean, dry, and free of dirt, grease, oil, etc. Remove any paint, primer, rust, etc. before applying J-B KWIK. For the best weld, roughen surfaces to be welded with fine or course sandpaper.

APPLICATION: Apply with putty knife, spoon, wooden paddle, or other suitable tool. Avoid contact with skin and eyes. May be applied in an even coat, weld bead, or extruded shape as needed.

DRYING: IMPORTANT: Mix only the amount that will be needed, as the mixture sets in 4 minutes. If the temperature is below 40 F, setting time is longer. The mixture will become warm while it sets. No clamping is needed. Only minimal pressure while setting.

Using J-B WELD products is easy.
Squeeze out equal portions. Mix thoroughly.
Clean surfaces, apply J-B KWIK, and let it cure.
That's all there is to it!